Drum Lifters
Model: LM800
800lbs, Full drum. 500lbs, Half-full drum capacity.
For 55-gallon closed steel drums.
Idea for low lever pouring and dumping operations.
Positive tilt lock on drum saddle to hand drum upright in transit.
When released, the operator can manually tilt the drum to control pouring and the drum can be rotated 360° in either direction.
Locks also hold drum in horizontal position.
Overall dimensions: 39`` H x 28 ½,``W x 8``D.
Net weight 20kg / 44lbs.
Model: DL350
Capacity: 350kg
For lifting 210 litre steel drum.
Easy moves and handles open or closed head, loaded steel drums. Allows quick, gentle loading into overpacks and keeps drums upright during lift, reducing spills and injuries.
Works easily with overhead hoist or hook from forklift.
All-steel construction.
Net weight: 9.5kg
Model: DL360
Capacity: 360kg
For lifting 210 litre open top and tight head steel drum, and plastic drums with L or X rings.
Welded gripping hooks.
Fitted with 20mm diameter steel pin for attaching to overhead hoist or crane.
All-steel construction.
Net weight: 4.5kg
Works easily with overhead hoist or hook from forklift.
Model: DL500A
Easy moves and handles open or closed head, loaded steel drums. Allows quick, gentle loading into overpacks and keeps drums upright during lift, reducing spills and injuries.
Capacity: 500kg
Drum: 55gallon
Net Weight: 5kg
Model: DL500B
Easy and safely moves the drum.
Capacity: 500kg
Drum: 55gallon
Net Weight: 7.5kg
Model: DL500
Drum Lifter has same application as crane, electric hoist and chain hoist.
Drum Lifter has various application for lifting if large and small steel drum without lid, or even for liquid or solid, the different shaped or transformed steel boxes.
Up-right lifting would be applicable by one hand operation if spring will be off.
As general usages, there is an example to use steel drum to cut half or adequate size to use.
In such case of no edge (portion of drum) appearing on grip section, there is risk for GRABS to slip or come off. But in this case, grips edges would be welded or bolted reinforcements as shown right.
Drum Tongs
Model: DM500 / DN500
Capacity: 500kg
For lifting 210 litre drums with overhead hoist.
All-steel construction.
Manual tong Model DM500 suitable for open top or tight head steel drum, and plastic drums with L or XL ring.
Semi-automatic tong model DN500 suitable for steel drums-open top and tight head.
To operate set locking lever in locked open position.
When central over the horizontal, drum release level to allow hooks to fall and locate under both rims, Hooks automatically engage as is lifted and disengage as drum is set down.
