Eagle Toe and Machinery Jack
What is EAGLE’s “Toe-Lift Jack”?
The special combination between a conventional hydraulic jack and a toe structural part made an EAGLE Toe-Lift Jack. It is intended to lift its load from significantly lower positions than before. As long as there is a gap of 20mm or so, Toe-Lift Jacks can lift the load than before. Since the toe structural part has two lifting points, i.e. its toe and head points, it can be used for much wider applications than before.
EAGLE Toe-Lift Jacks’ Four Basic Functions
It is a very basic function of it. Since both its toe and head can lift its load, its usage is twice than before.
Adjustment of positioning
EAGLE can do position adjustment as fine as an millimeter order. It is best suited for delicate works like machines’ level matching.
By placing its base on one side, and its toe on the other side, the Toe-Lift Jacks can widen the gap between two objects.
In case of setting a machine, you may sometimes want to slide it a little bit. EAGLE’s Toe-Lift Jacks can be laid down to slide the machine by using the counterforce from the wall.
3 “S” Concept
EAGLE’s approach to highest work safety
Remote Toe-Lift Jack + Hand Pump
How safe are you in jacking a machine that is positioned unstably?
Conventional jacks require their operators to do jack-up operations right beside the machines to be jacked. If the machines are positioned unstably, there is a risk that they might fall down during jack-up operation.
EAGLE’s Remote Toe-Lift Jack + Hand Pump enable its operator to remotely operate the jack-up from safe place. For a lowering operation, an operator can directly grab control valve and therefore, it can ensure to lower the load slowly and safely.
How safe are you in jacking in a small and confined space?
In case of a conventional jack-up operation in a small and confined space, there are a lot of safety risks because it is quite difficult for its operator to escape from the spot.
EAGLE’s Remote Toe-Lift Jack + Hand Pump enable its operator to operate the jack-up from outside the pit and therefore, it is much safer and easier.
How safe are you in doing fine adjustment of a machine placement position?
Fine adjustment work by a bar tends to cause counterforce, which could throw its operator away and hurt it.
EAGLE’s Power Wedge ensures operational safety because its operator can do the fine adjustment by only controlling its external pump.
EAGLE’s approach to highest work quality
How smart are you in doing fine adjustment of a machine placement position?
Fine adjustment work by a bar tends to cause some damage on the floor. It is also difficult to achieve precise positioning on a right spot.
EAGLE’s Power Wedge can do the job without any damage on the floor, while it can adjust the position on a millimeter basis.
Toe-Lift Jack with Slide Table
How smart are you in doing machine assembly (integration of multiple units)?
Conventional machine assembly work by jacks and rollers requires multiple jack-up and jack-down operations for all the units to reach final position for assembly. It has high risk of damaging machines and the floor. It is also time consuming.
EAGLE’s Toe-Lift Jack with Slide Table can do the job extremely simply and accurately. It is friendly to machines and the floor, and does not take much time.
Remote Toe-Lift Jacks + Hand Pump
How smart are you in jacking the load in two separate points simultaneously?
With conventional jacks, two operators have to try to manually synchronize individual jack handling.
EAGLE’s Remote Toe-Lift Jacks + Hand Pump enable one operator to operate the two jacks set in two separate positions in the total synchronization.
EAGLE’s approach to highest speed
Remote Toe-Lift Jack + Hand Pump
How speedy are you in jacking through no-load path?
In case there is a gap between the toe of the jack and the contact point of the machine where its load is incurred, conventional jacks’ pump discharge speed is all the same regardless of the load, and therefore, it takes time to reach its load contact point.
EAGLE’s Remote Type Toe-Lift Jack + Hand Pump have the two stage pump discharge, which enables the toe to reach its load contact point much faster and therefore, shortens its work time.
How speedy are you in doing fine adjustment of machine placement position?
When you slide a machine by pushing it laterally up to the wall by a conventional jack, you have to manage its counterforce by the other wall. Also, you may need something like iron block to fill the gap between the jack and the machine.
EAGLE’s Power Wedge enables you to do this work without receiving its counterforce, and complete the task real quick.
How speedy are you in moving a machine on the floor?
When you try to move machinery on the floor by a conventional jack, you have to place rollers and you have to do resetting the rollers one at a time depending on the distance you want to move it.
In case of EAGLE Rollers, a machine can be fixed to it and therefore, once the first setting was made, the movement of the machine is done so efficiently.
These are our Toe-Lift Jacks’ standard G-series models, which are used by our customers most.
Remote Toe-Lift Jack and Hand Pump
“K-series” products are remotely controllable and highly maneuverable.
They embodied the 3″S” approaches and they are the flag ship of EAGLE’s Toe-Lift Jacks.