How to extend the lifespan of your pallet truck
You must be asking: is there anything you can do to make sure your pallet truck doesn’t break down?
Today, we will share you some tips on the things you should look for when using your pallet truck so that you can repair it yourself. As a result, you extend the life of your pallet truck and save on your financial resources.
Preventive maintenance of your pallet truck is also critical for a safe working environment. You may prevent unpleasant surprises and extend the lifespan of the pallet truck by conducting a daily inspection of it. Constant inspections can save you time and money while prolonging the life of your pallet truck.
1. Top up the oil of your pallet truck regularly
You should check your pallet truck’s oil level every six months, and it should be replenished or changed as needed. Pallet trucks are most effective when equipped with hydraulic oil. If other oil is used, the pallet truck may be difficult to pump up because this oil will most likely be too thick.
Step-by-step guide to top up oil in your pallet truck:
- Fold the pallet truck over on its side, and set the forks in their lowest position
- Put the top of the hydraulic cylinder’s drain plug in place
- Remove the screw plug
- Begin by adding the hydraulic oil until it reaches the bottom of the filler opening
- Install the screw plug and turn the device upright
2. Lubricate your pallet truck
All bearings and axles should be greased with long-life grease by the manufacturer.
On a monthly basis, you should lubricate the pallet truck’s wheels, axles, and grease fittings with long-life grease.
3. Clean your wheels
A clean work environment makes working more pleasurable. The wheels on a pallet truck depend greatly on the surface on which they run. Dirt, wires, or any other form of foreign debris can get caught between the wheels, causing them to wear much faster. This may be readily prevented by cleaning the wheels and removing this dirt before utilising the pallet truck.
As well, pay special attention to curbs and steps. Taking a short cut may look appealing, but your wheels might disagree. Take a longer road instead of taking a shortcut to avoid your wheels from cracking in this manner.
4. Adjust the chain into the right position before use
Check on a regular basis to see if your pallet truck’s chain is still in the correct position. You can usually tell this when the lowering valve does not lower the forks. This may be quickly remedied by re-attaching the chain to the lever.
5. Adjust the lowering valve when needed
If your pallet truck no longer pumps or lowers efficiently, it is most likely due to the lowering valve.
In this case, you must adjust the lowering valve so that you may pump or lower the forks. If pumping has no effect, slightly loosen the lowering valve screw.
6. Don’t over stress your pallet truck
Overloading the pallet truck is not a good idea. Remember to keep track of maximum lifting capacity ratings.
Do not drive a pallet truck on a hill: the vehicle may reverse and inflict damage.
Set the operating lever to DRIVE to operate the pallet truck. As a result, the drawbar moves more freely, lowering the pressure in the hydraulic pump section. This protects the hydraulic seals and valve components. This ensures that your equipment will last longer.
Get regularly servicing done from your provider
You can easily extend the life of your pallet truck with a couple of quick inspection and servicing.
A reliable servicing provider will know what to look out for.
Getting your pallet truck serviced regularly can help you save a great deal of financial resources in the long-run.
Electric pallet jacks can help you avoid workplace accidents and make warehouse tasks more efficient and profitable. Pallet jacks that run on electricity are a simple yet cost-effective way to lower manual-handling injuries and make warehouse operations more efficient and productive.
Fully electric jacks have both power drive and lift, so they don’t need to be pumped manually. Fully electric jacks have both power drive and lift, so they don’t need manual pumping to raise weights. For indoor usage, they’re an excellent option because they’re compact and manoeuvrable in comparison to a forklift. If you opt for a ride-on model, you’ll just need a licence.
Industries that would benefit from electric pallet jacks include: manufacturing industry, retail, foodservice industry and chemical factories.
Pallet jacks are available in a range of capacity ranges, with loads starting at around 1,000 kg and going up to 2,000 kg. You would need to make sure the jack can support the weight of typical pallet loads that you move and lift. An overloaded jack might fall over and break if it is unable to handle the weight in the long term.
Outdoor or Indoor?
The next question to ask is: do you use the pallet truck indoor or outdoor. This is important as some pallet trucks are catered for uneven ground.
Lift Height Capacity
To lift loads of up to 2 tons, your jack must be able to lift them to the required height. Electric pallet jacks have a wide range of lifts – from around 1,200mm to even 5,000mm or more.
A pallet truck can lift an average of 800mm in lift height.
It is important to check the standard pallet sizes that you would be using, and choose a pallet jack that will suit those requirements.
If you’re constantly stacking pallets that don’t match the typical dimensions, a jack that can handle various pallet sizes, such as an electric counterbalance stacker, is a good investment.
Pedestrian or ride-on:
A pedestrian or walkie pallet jack (handle for the operator to drag around) should be sufficient in many warehouses.
A ride-on / stand-on version, on the other hand, may save time and help efficiency in a bigger business. It’s vital to note that a ride-on model requires a forklift license to operate.
A person standing on a platform at the rear of the truck drives the electric ride-on pallet truck. This enables you to move it to where it’s required via a steering wheel, buttons, or lever. It’s intended for long-distance travel rather than non-ride-on pellet trucks.
Load pallets into an HGV in the best way with a ride-on pallet truck. When required, foldable platforms on ride-on pallet trucks allow them to function as a tiny walkie pallet truck.
Nowadays, most electric jacks are extremely small and efficient. When not in use, you may need to think about the amount of storage area you have available for storing them. Some versions also include foldable platforms to save space when not in use.
Naturally, you’ll want to keep an eye on your budget while shopping for an electric pallet jack. Electric jacks are a very cost-effective option in industrial settings and differ in price little from manual equivalents.
Choosing a Provider In Singapore (Is there proper after sales support?)
It may definitely be less costly to shop from various suppliers overseas, however one issue to worry about is the after sales servicing and warranty.
Getting a local pallet truck Singapore provider may be helpful as they are able to provide proper after service care for your product in the long-term. In addition, they would most likely be able to cater to your local requirements.
Stackers are a kind of pallet jack that are used to move goods on pallets. They can easily lift extremely heavy weights throughout your industrial warehouse storage facility.
Hand Pallet Stackers are ideal for raising and lowering weights of up to 5 tonne (5 Tonnes). The majority have forks and operate similarly to forklifts, while others include load-rated tables for placement.
Why buy a stacker?
Modern supply chains are often made up of racks that reach heights of 4 meters up to over 13 meters. Most items are moved and stored using an electric stacker before being sent along a conveyor belt.
Most of the time, it’s the first machine a customer purchases once a pallet truck or hand truck is no longer enough to hold all of their products. Pallet lifters come in a variety of forms and have various functions, including load capacity, lifting height, and energy storage systems.
Let us now demonstrate the distinctions in our machines and offer you a guide to selecting the best pallet stacker.
1. Manual pallet stacker
The Stacker vehicles, also known as hydraulic lifters, are manually driven. They generally have a lifting capacity of 1000 kg and vary in price depending on the features.
A motorised push-type lifter is a kind of forklift that does not require a pallet and can lift from 1 to 100 kg at heights ranging from 1.6 m to 3.1 m without the need for additional supports, depending on its design. Although some of these machines include a fast lift option that allows them to handle loads.
Essentially, these pallet lifters are not designed for frequent usage and subject the user to strain and pain, as well as low efficiency.
2. Mono Mast Stacker
Electric stackers with mono mast are usually full electric trucks that drive both electric and lift-elevator. The load capacity varies from 1000 to 1200 kg depending on the application. They can carry most loads on euro pallets or other load carriers due to their load capacity of 1000Kg or 1200Kg.
A mono mast stacker is a machine that can be used to raise products to an ergonomic working height, resulting in increased productivity while reducing stain for the user.
Backflips are a standard feature on these vehicles, and they may also be equipped with a remote control for easier operation while lifting or lowering in a stationary position.
The Mono Mast stackers may also be utilised as a lift table and stacker truck when required. It’s a low-cost, multi-purpose stacker that may be used as a lift table and stacker truck if necessary.
3. Electric pallet stacker
The most frequently used completely electric stacker has a duplex mast and is typically utilised for routine stacking in small to medium-sized warehouses, retail outlets, and small workshops. Electric pallets are used to move, lift, and stack pallets.
When it comes to selecting the best electric pallet stacker for your needs, there are a variety of variables to consider, including budget, space, access to electricity, lifting height and lifting capacity. The capacity decreases after this lifting height while the trucks lift their rated capacity of 1000Kg up to 2500mm.
Electric wheelchairs are available in a variety of styles and battery technology to match the demands of each client.
The great thing about this is that it only takes a few minutes to charge up. There are no water refills or maintenance requirements for the battery. These trucks would usually have on-board chargers that allow for easy transportation throughout the warehouse.
4. Ride-on pallet stacker
If you need to stack in heavy-duty usage with longer movement distance, an Electric Ride-on pallet stacker is the way to go. These machines are designed for single or multiple shifts and have a foldable platform. The truck may be utilised as a normal walkie stacker at low speed when the platform is lowered. The